The SMD HLC-2 High Level Converter - DLR is the perfect solution for
connecting amplifiers to your factory radio. Designed to bridge the gap
between factory audio systems and aftermarket audio amplifiers, this
converter allows you to enhance your audio experience without having to
replace your entire audio system.
With its impressive ability to
accept up to a 40V RMS BTL audio signal, the HLC-2 is suitable for all
situations. It provides a big input capacity and a big clean output,
delivering up to 10V RMS single-ended output signal with a super low
output impedance of 100 ohms. The result is exceptional sound quality
with a THD+N level of less than 0.003%.
One of the standout
features of the HLC-2 is its compact size and efficiency. It is the
cleanest, smallest, and lightest active speaker level to RCA level
converter on the market. Designed to be easily mounted using a couple of
zip ties through the built-in zip tie slots, this converter is small
enough and consumes minimal power, making it suitable for a wide range
of vehicles such as motorcycles, side by sides, golf carts, scooters,
and more.
Furthermore, the HLC-2 can also be used as a line
driver or phase inverter. Its strong driving ability allows it to output
up to 10V RMS even when driving 10 amplifiers. By soldering female RCA
ends to the high-level input wires, you can transform the HLC-2 into a
killer line-driver. Additionally, it can be used as a phase inverter to
effectively "strap" a pair of identical half bridge amplifiers together.
The
HLC-2 comes with the necessary owner's manual to guide you through the
installation process. Designed with precision and durability in mind,
this converter features military-grade components, including a
high-speed power supply for low noise and wide input range,
audiophile-grade operational amplifiers for low noise and distortion,
and a military-grade FR4 circuit board.
When comparing the SMD
HLC-2 to other brands, it outperforms in terms of size, weight, max
input voltage, signal-to-noise ratio, distortion, current draw, output
impedance, and output voltage RCAs. Its compact size, exceptional
performance, and versatility make the SMD HLC-2 High Level Converter -
DLR the ideal choice for any vehicle audio upgrade. Get yours now and
enjoy enhanced audio quality on the go.
Features:
- Class A/B Output
- 2-channel active high-level converter
- Balanced 2 wire high-level inputs and unbalanced RCA outputs
- Independent Left/Right gain controls
- 10V RMS output
- Micro-power high speed mil spec power supply
- Ultra-low distortion over entire audio spectrum
- Blue LED power good indicator
Specifications:
- Operating voltage range for power supply: 6-18 VDC
- Operating voltage range for remote turn on: 6-18 VDC
- Frequency Response: 10Hz-40,000 Hz +/- 0.3dB
- Maximum input voltage: 40V RMS BTL
- Maximum output voltage: Greater than 10V RMS
- Signal to Noise: greater than 115dBA
- Distortion THD+N: 0.003%
- Current Draw @12.6 V: 80mA
- Output Impedance: 100 ohms
- Output Voltage RCAs: 10V RMS