is an amazing entry level subwoofer that both handles great power and gives you smooth clean bass. These subs work great in both sealed and ported boxes giving you many options for placement in any vehicle.
The ZR10 model comes in both dual 2 and dual 4 ohms configurations giving you many options to perfectly match your amplifiers optimal impedance. The ZR10.2D
comes with a 2.5 inch aluminum voice coil that handles 700w RMS and 1400w Max power. The large foam surround and pressed paper cone works greatly together to deliver smooth crisp bass that can be heard strongly throughout and outside the vehicle.
- Large foam surround giving great xmax and bass precision while keeping great cone control when the subwoofer is close to maximum power.
- Great power handling of 700w RMS and 1400w Max through a high strength 2.5 inch aluminum voice coil.
- Very strong stamped basket with show quality DS18 logos on the frame, magnet boot, magnet, DS18 dust cap, and high quality push terminal connectors.
- Designed to give crisp and clear bass in any vehicle and can be used in sealed and ported boxes making them highly versatile.
- Nominal Diameter 10"
- Nominal Impedance 2 + 2 Ohms
- RMS Power Handling 700W
- MAX Power Handling 1400W
- Sensitivity (1w/1m) 81 dB
- Frequency Response 27Hz - 200 Hz
- Recommended Lo Pass Crossover 100 Hz
- Voice Coil Diameter 2.5" / 61.6mm
- VC Former Material Aluminum
- Winding Material Copper
- Cone Material Non Pressed Paper
- Dust Cap Material PPI
- Surround Material Foam
- Basket Material Steel
- Basket Color/Finish Matte Black
- Magnet Material Ferrite
- Magnet Weight 100 oz
- Displacement Volume 0.05 ft3
Thiele & Small Parameters:
- Equivalent Volume 8.26 L
- Excursion (one way) 25mm
- Free Air Resonance 34Hz
- Mechanical Factor 4.3
- Electrical Factor 0.8
- Total Factor 0.67
- Moving Mass 252g
- Compliance 53.37µ m/N
- BL Factor 8.78
- Voice Coil Inductance 546.4m mH
- Cone Area 333.29 Cm2
- DC Resistance 1.8 + 1.8 ohm
- Efficiency Bandwidth Product 42.5
- Overall Diameter 10.31” / 262mm
- Overall Depth 6.92" / 176mm
- Front Mount Baffle Cutout 9" / 229mm
- Mounting Depth 6" / 152.3mm
- Motor Diameter 6.1" / 155mm