DS18 is proud to present you with a subwoofer long awaited by all bikers alike! The DS18 PRO-W10.2SNEO
is a full size water resistant loudspeaker woofer made to withstand
harsh elements all while not sacrificing any build quality that normally
comes with marine speakers.
This hybrid both comes with a standard subwoofer basket, coil, and Neodymium motor structure all while the cone of the PRO-W10.2SNEO
is water tight and made so it can take any water without risking
corrosion and deformation that water naturally causes. The basket has
also been coated to withstand corrosion.
The cone on the PRO-W10.2SNEO
is made of durable light weight plastic with the rubber surround to
make sure things stay tight. This combo allows zero water to penetrate
into the inner workings of the woofer to ensure long life and loudness.
This woofer is offered in single 2 ohm and 4 ohm configurations and
handle 400w RMS and 800w peak power and works very well with both sealed
and ported boxes.
- Woofer made especially for motorcycles but can be used in all applications that need a water resistant solution.
- Don't sacrifice any loudness that you normally loose with IPX rated subs.
- Coated basket to help reduce the chances of corrosion.
have released single voice coil 4 ohm and 2 ohm versions so you can
optimally set your ohm load with the amplifier of your choice.
lightweight plastic cone and rubber surround to prevent any water
perturbing down into the working parts and motor of the woofer.
to be loud and clear so you can feel and hear the thump at 70+ MPH
highway speed as long as the appropriate power is supplied.
- Rms Power: 400 Watts
- Peak Power: 800 Watts
- Woofer Size: 10"
- Voice Coil: 2.5" Kapton VC
- Impedance: 2-ohm
- Frequency Response: 40Hz – 5KHz
- Sensitivity: 91dB
- Overall Diameter: 10.39"
- Baffle Cut Out: 9.09"
- Mounting Depth: 4.8"