Motorcycle Audio enthusiasts demand the highest quality for their high-end speakers because of the open-air environment that they love to be in. Hard riding comes with rigorous vibration and that can damage your speakers. We at DS18 want our motorcycle lovers to feel confident in their speaker choice and not have to worry about moisture damage or vibration damage.
The PRO-M8.2NEO was created to battle these problems, we have developed an amazing new set of motorcycle speakers that are water resistant so if you get caught in the rain, you don have to worry about damage. We have also reinforced other vital parts to hold up to vibration better so you can ride hard and long in any kind of weather.
The PRO-M8.2NEO variations are stronger and handle power more efficiently because of the Neodymium motor. The PRO-M8.2NEO motor is much stronger than traditional motors and has a very high motor force and sensitivity, so it can produce loud and clear sound at a lower volume level. The PRO-M8.2NEO water resistant speakers come in 2 ohms loads so you can effectively draw more power for your amp and not have to worry about bridging amps or complicated wiring.
- Rigid treated cone with very high sensitivity that is also water resistant all while producing some of the richest sound we have to offer.
- 2 ohms configuration. It will load your amp at its lowest impedance so you can squeeze every watt of power out.
- Neodymium magnet that not are only lighter and smaller, they help the speaker transfer wattage more efficiently for a louder overall sound.
- Model: PRO-M8.2NEO
- Type: Full Range Loudspeaker
- Size: 8"
- RMS Power: 250W
- MAX Power: 500W
- Frequency Response: 60Hz - 16KHz
- Impedance: 2 Ohm
- Sensitivity: 96dB
- Surround: Cloth Edge
- Frame: Aluminum
- Cone: Fiber Glass with Foam Composite Paper Cone
- Magnet: Neodymium
- Voice Coil Wire: KCCAW
- Voice Coil Size: 1.5"
- Mounting Depth: 3.34" (84.92mm)
- Cut-Out Dimension: 7.26" (183mm)
- Overall Depth: 3.66"/(93mm)
- Overall Diameter: 8.2"/(209.3mm)